Mon Roomba ne charge pas

Votre Roomba peut ne pas continuer à se recharger après avoir été branché pendant la nuit pour différentes raisons. This is frequently due to dirty charging connections on the Roomba, however your Roomba’s battery may also be at fault. Ce’s possible that the problem is where the car’s charging station is located.

Roombas and other robotic vacuums are useful in any home since they can clean your floors without further assistance from you. Their best attribute is their capacity for independence. Une fois que vous’ve first put them up, you may leave them alone and they will keep working for a very long time.

Your Roomba can recognise when the battery is getting low and dock at the charging station right away. pourtant, if something goes wrong, you can return home to a dead Roomba.

Dans ce post, nous’ll examine a few probable problems and show you how to fix them so that your Roomba can start charging again.

Les contacts de charge sont sales

Charging Contacts Are Dirty Both the charging station and the Roomba have connectors for charging devices that can transfer electricity from the charging station to the Roomba.

The Roomba can only be charged while it is in touch with the strips of the charging station. Two very tiny metal strips that resemble contact points make up the charging connectors.

Pourquoi ça échoue:

Dirt might accumulate over time on the charging station’s and Roomba’points de contact. The Roomba can’t charge if this occurs since the contact points won’t be able to connect completely.

The Roomba’points de contact, which are located close to the front of the device where the brushes are, are more susceptible to experience this. Par conséquent, the areas where the parts come into contact with dust and dirt often.

Comment le réparer:

pourtant, it is simple to clean the contact points on your Roomba and its charging station. A Roomba won’t charge frequently because the charging connections are filthy. Si votre Roomba a gagné’t facturer, you should try this first.

Your contact points may be cleaned in a few different ways.

• If using a dry towel to clean it doesn’ça marche, you might also try using rubbing alcohol and a moist cloth.
• If neither of these solutions work, you could get better results using a sponge made of steel wool.

Make careful to unplug the charging station from the outlet before cleaning the contact points. Avoid accidentally shocking yourself with electricity.

Batterie Roomba défectueuse

Bien sûr, the battery is the component of your Roomba that actually stores a charge and supplies the suction power. Particularly rechargeable Ni-MH (Nickel-hydrure métallique) batteries are used in Roombas.

The Roomba’s battery should be able to maintain a charge for roughly two hours and should last for about 400 cycles de charge, according to manufacturer iRobot.

Pourquoi ça échoue:

Your Roomba’la batterie, bien sûr, is the component that actually maintains a charge and powers the vacuum. En particulier, Roombas employ rechargeable Ni-MH (Nickel-hydrure métallique) batteries.

According to iRobot, the manufacturer of the Roomba, the battery should be able to retain a charge for around two hours and endure for 400 cycles de charge.

Comment le réparer:

Toi’ll need to buy a new battery for your Roomba if the current one is entirely dead. The good news is that iRobot makes getting a new battery simple, and changing the battery itself is not difficult.

• Première, remove the five screws holding the bottom cover on your Roomba’s base in order to change the battery. The lid is secured by four of these screws, and the rotating brush is secured by the final one.
• You may now pull off the lid to access the battery after removing the screws. The battery is held in place by two tabs. By releasing these tabs, you may remove the battery from its slot.
• The issue should be resolved when you instal the new battery and reassemble your Roomba.

To keep the battery in good condition, keep your Roomba in a cool, dry location when not in use. aditionellement, you must routinely clean your Roomba’s brushes. Your Roomba’s battery will last longer if you use it frequently.

Station de charge défectueuse

Naturellement, your Roomba can only recharge itself using the charging station that is included with it. Although you may charge your Roomba without it, the station is necessary for automatic charging to function.

Pourquoi ça échoue:

A Roomba’s charging station doesn’t often malfunction on its own. The possibility that the contact points on the charging station are filthy has previously been discussed, but it is also possible that the charging station isn’t receiving electricity from the wall socket.

Comment le réparer:

To start with, you should determine if the Roomba, la borne de recharge, or the outlet the station is hooked into is the issue.

• Your GFCI outlet may have tripped, or the charging station may have triggered the circuit breaker for that outlet, si vous en avez un.
• aditionellement, confirm that the charging station’s connector is fully inserted into the outlet.
• One additional test you may perform is to put the Roomba’s charging cord straight into the outlet if you already know the outlet is not the issue.
• If the battery indicator on your Roomba illuminates when you do this, your charging station is probably the issue.
• Toi’ll probably need to get a new charging station from iRobot if the current one is definitely dead.
• You could be eligible for a free replacement if your Roomba is still covered under warranty.

Roulette sale

The small wheel near the front of your Roomba is the caster wheel. This wheel isn’t powered and can’t be used to steer. Son seul travail est de maintenir le Roomba à la bonne hauteur.

Pourquoi ça échoue:

Heures supplémentaires, des objets peuvent se coincer dans le passage de roue de la roulette. S'il y a assez de bric-à-brac dedans, il peut pousser la roue hors de son logement plus que d'habitude.

Étant donné que la roulette est proche des contacts de charge, cela soulève essentiellement le Roomba afin que les contacts de charge du Roomba puissent’t toucher ceux de la station de charge.

Comment le réparer:

The caster wheel of a Roomba is fairly simple to remove and clean once it has been dirty. You just need to grip the stem that connects the caster wheel to the Roomba firmly and pull it out to remove it. The stem is what holds the caster wheel to the Roomba.

The caster wheel well may be accessed once the wheel has been removed from the caster. After you have removed any debris that you discover in there and reattached the wheel, your Roomba should begin operating as it did before.

Erreur de température

Your Roomba won’t operate if the battery is too warm or too cold. You will get an error code if your Roomba shut down due to the temperature. Codes 6 et 7 indicate if the battery is too warm or too cold.

Comment le réparer:

• Move your Roomba to a cooler location and leave it there for at least an hour if it is giving you a temperature code problem.
• This should be all you need to do if temperature extremes are what’s truly causing the issue.
• Consider shifting your charging station to a warmer area of your house if at all possible.

FAQ-Mon Roomba ne charge pas

Pourquoi a gagné’t mon Roomba s'allume ou se charge?

Si votre robot aspirateur Roomba série I a gagné’ne s'allume pas ou ne peut’t facturer, la plupart du temps, vous pouvez résoudre le problème en redémarrant votre robot. Appuyez sur le bouton CLEAN et maintenez-le enfoncé pendant 20 secondes pour que votre Roomba redémarre. Quand tu lâches le bouton, l'anneau lumineux affichera une spirale blanche allant dans le sens des aiguilles d'une montre pendant qu'il redémarre.

Quelle est la durée de vie d'une batterie Roomba?

If you take excellent care of your robot’la batterie, you shouldn’t need to purchase a new one for at least two to three years. Here are some suggestions for battery care to prolong their life and maintain the optimum cleaning performance from your Roomba®: iRobot batteries should only be used.

Comment réinitialiser un Roomba mort?

Roomba® série I et série j: Pour nettoyer votre robot, appuyez sur le bouton CLEAN et maintenez-le enfoncé pendant 20 secondes. Maintenez le bouton enfoncé pendant 10 secondes sur un robot de la série j. Quand tu lâches le bouton, l'anneau lumineux blanc tournera dans le sens des aiguilles d'une montre. Votre robot peut prendre jusqu'à une minute et demie pour s'allumer.

La tablette Amazon Fire ne se charge pas

Conclusion

Your Roomba may not be charging for a variety of reasons, but the majority of these issues are simple to resolve and won’t take much of your time or money.

Knowing what to look for will make troubleshooting your Roomba lot simpler if it begins acting up.